翻訳と辞書
Words near each other
・ Bonobos (disambiguation)
・ Bonogin, Queensland
・ Bonogo
・ Bonola (Milan Metro)
・ BonoLoto
・ Bonoman
・ Bonomi
・ Bonomi BS.10 Ardea
・ Bonomi BS.11 Milano
・ Bonomi BS.14 Astore
・ Bonomi BS.15 Bigiarella
・ Bonomi BS.16 Allievo Bonomi
・ Bonomi BS.17 Allievo Cantù
・ Bonomi BS.18 Airone
・ Bonomi BS.19 Alca
Bonomi BS.2 Balestruccio
・ Bonomi BS.20 Albanella
・ Bonomi BS.22 Alzavola
・ Bonomi BS.24 Biposto Roma
・ Bonomi BS.28 Alcione
・ Bonomi BS.4 Basettino
・ Bonomi BS.5 Ballerina
・ Bonomi BS.7 Allievo Italia
・ Bonomi BS.8 Biancone
・ Bonomi BS.9 Bertina
・ Bonon
・ Bononi
・ Bononia
・ Bononia (moth)
・ Bononia (titular see)


Dictionary Lists
翻訳と辞書 辞書検索 [ 開発暫定版 ]
スポンサード リンク

Bonomi BS.2 Balestruccio : ウィキペディア英語版
Bonomi BS.2 Balestruccio

The Bonomi BS.2 Balestruccio ((英語:House Martin)) was an Italian sailplane designed to set records. In 1932 it set a new national endurance record with a flight of over 25 minutes.
==Design and development==
The Balestruccio was a single seat glider with a high aspect ratio gull wing built in four parts. The two inner panels, straight edged with constant chord and carrying dihedral, joined on top of the fuselage, their extremities braced from the lower fuselage with flat steel V-struts, encased in faired wood to reduce drag and assisted on each side by a pair of jury struts. The upper end of each strut was attached on one of the two wing spars. The outer wing panels were straight tapered, with rounded tips. There were differential ailerons on the outer trailing edges and flaps inboard.〔
The fuselage of the Balestruccio was hexagonal, with deep, near vertical sides.〔 Its comfortable cockpit〔 was immediately in front of the wing leading edge and was originally provided with a wooden canopy with small side openings, similar to that used on the German DFS Fafnir, but this was later replaced with a more conventional open arrangement which provided better all-round visibility. A single, sprung skid and a tail bumper provided an undercarriage. The fuselage tapered aft to a mid mounted horizontal tail consisting almost entirely of the elevator; although this had straight leading edges, a combination of their slight sweep and the full, rounded trailing edges gave the planform an almost elliptical appearance. There were aerodynamic balances and a large cut-out for rudder movement. As first constructed, the vertical tail was rather similar, with a small fin and a full, deep, curved, balanced rudder which extended slightly below the keel. Later, with the fuselage shortened by one frame or about , the Balestruccio was given a new, angular fin and rudder with straight taper and square tip. Like the old rudder, this was also balanced and deep, though extending only to the keel. The original horizontal tail was retained.〔

抄文引用元・出典: フリー百科事典『 ウィキペディア(Wikipedia)
ウィキペディアで「Bonomi BS.2 Balestruccio」の詳細全文を読む



スポンサード リンク
翻訳と辞書 : 翻訳のためのインターネットリソース

Copyright(C) kotoba.ne.jp 1997-2016. All Rights Reserved.